Introduction of Double Tooth Roller Crusher

The double-toothed roller crusher is actually a kind of double-toothed roller crusher, because the roller surface is toothed, it is also called the double-toothed roller crusher.

The double-toothed roller crusher, also known as 2PGC toothed roller crusher, belongs to the double-roller type of roller crushers. The shape of the roller surface can be divided into coarse and fine-toothed rollers. The tooth type can be configured according to the needs of users and the size of the material required. Adjustable production, suitable for brittle and soft materials, double-tooth roller crusher is suitable for ceramsite sintering, coal, cement, silicate, glass, ceramics and other industries, suitable for crushing brittle materials below medium hardness, mainly used for ore The coarse and medium crushing operations.

Although the double-toothed roller crusher is a device derived from the double-toothed roller crusher, there are still many differences between the double-toothed roller crusher and the smooth roller crusher, such as:

1. The anti-noise effect of the roller crusher is better, and the structure is also environmentally friendly, because it is equipped with a dust-proof board inside, which has good sealing performance and dust will not be scattered around.

2. The corresponding material hardness of the roller crusher is below high or medium, such as ore and rock, which has a better crushing effect than ordinary crushers. At the same time, the roller crusher in the grinding system can be used in the production of grinding operations. The capacity is improved because the material has been loosened inside the material under the squeeze of the roller crusher.

3. The double-toothed roller crusher is equipped with a hydraulic automatic return device, which can prevent the damage of the high-hardness materials to the toothed rollers, and can also automatically remove residual materials without causing blockage.

4. The double-tooth roller crusher has high working efficiency and finer crushing effect, which is especially suitable for large coal plants.

5. The two toothed rollers of the double-toothed roller crusher move towards each other. When the material falls, it enters between the two toothed rollers and is crushed to the required strength by splitting, frustrating, and hitting.

6. The double-tooth roller crusher is prone to over-grinding, and the grinding particle size is not easy to control. The powder particle size of the double-tooth roller crusher is relatively uniform.