• Double Shaft Mixer
  • Double Shaft Mixer
  • Double Shaft Mixer
  • Double Shaft Mixer
  • Double Shaft Mixer
  • Double Shaft Mixer

Double Shaft Mixer

Model: ZJ300-ZJ900

Capacity: 10-42 t/h

Stirring humidity: 3-25%

:

ZJ series Double Shaft Mixer is the equipment which can covey wet and mix powder/partical material by its double shaft blade.

Our Advantage

1. Wear Resistance
The material rubs the blade and housing when mixing materials, these two parts will be worn out if it works for a long time, ZKCORP ZJ series DSM is lined with lining ribs inside the housing and added  protecting sheath (optional) on main shafts, to protect the equipment. And the material of blade is 40Cr (optional) wear resistance  steel for a long service life. See the picture compared with other supplier.
 
2. Durable
Regarding to the key parts of DSM, like shaft and housing, ZJ DSM adopts most durable material to ensure the reliability. Compared to other supplier, the service life higher than 10%~20%.
 
3. Emergency Protection 
If the stones and other big hard blocks fed into the DSM when blade rotating, it would do harm to the blades and transmission device include motor and reducer.
 
ZJ series DSM installed  hydraulic coupling(optional) or pin coupling, when the blades stuck, coupling broken, in avoid of parts damaged.
 
Also there are electrical protection devices in starter cabinet, the circuit breaker protection would be triggered in abnormal conditions.
 
4. Material Isolation 
The DSM process powdery/semi-liquid material, the material is easy to leak through the shaft-housing connecting points. Once powder leaks to bearing, the service life would sharply reduced.
 
ZJ series DSM set isolation blocks at connecting points, the blocks can seal material in housing, the bearing is far from blocks, ensure the bearing works normally.  
 
5. EASY Refit as Requirement
ZJ series DSM can be refited (especiall the cover lid) to several types mixer to fit different working conditions and requirements. See picture in next pages.
    ZJ series Double Shaft Mixer is the equipment which can covey wet and mix powder/partical material by its double shaft blade. The double shaft mixer usually used in sludge, clay, coal, coal ash process. It has advantages of structure compact, hi- working efficiency, and eco-friendly operation.
     
    The transmission device (gear box) drive two shafts to opposite direction synchronously.  When the material fed, the water sprayer(optional device) starts to work to wet the material. The blades on shafts mix the material with water or other material, and push mixed material forward, and discharge the material to outlet.
WhatsApp
+86 18037866379
WeChat
+86 18037866379

Contact Us