• FGD SYSTEM
  • FLUE GAS PURIFICATION SYSTEM
  • CEMENT GRINDING STATION
  • CEMENT PRODUCTION LINE
  • ACTIVE LIME PRODUCTION LINE
  • LIME SLAKING PLANT
  • MAGNESIUM PRODUCTION LINE
  • MAGNESIUM OXIDE (MgO) PLANT
  • LITHIUM PRODUCTION LINE
  • GYPSUM POWDER PRODUCTION LINE
  • ALUMINUM ASH PROCESSING SYSTEM
  • LECA PRODUCTION LINE
  • FRACTURING PROPPANT PRODUCTION LINE
  • SOLID (HAZARDOUS) WASTE INCINERATION SYSTEM
  • PULVERIZED COAL PREPARATION PRODUCTION LINE
  • GGBS PRODUCTION LINE
  • SUPERPHOSPHATE PRODUCTION LINE
  • MOLECULAR SIEVE PRODUCTION LINE
  • SOIL REMEDIATION SYSTEM
  • Grinding Mills
  • Kilns & Dryers
  • Conveyors
  • Crushers
  • Bucket Elevators
  • Dust Collectors
  • Project details

    Project Name

    150 T/D Lime Project in Uzbekistan

    Capacity

    150 T/D

    Location

    Uzbekistan

    Project Overview

    Date of Signing: 2013-10-15

    Processing Material: limestone

    Processing Capacity: 150 tons per day

    Equipment Configuration: rotary kiln, vertical preheater, bucket elevator

    The project is located in Tashkent, Uzbekistan. It is a lime production line with a daily output of 150 tons. In October 2013, the customer visited our company and signed a supply contract for the vertical preheater and bucket elevator kiln tail section. The production line uses the old rotary kiln (φ2 .5×40m) transformed into calcined limestone. 

    Project Solution

    1. Raw material storage, transportation and delivery

    Limestone with a particle size of 10-50mm is transported to the factory area and stacked in the stockyard. Loaders are used for the stockyard operations. The material with qualified particle size is loaded into the receiving trough set up in the material yard by the loader, and under the receiving trough is quantitatively fed by the feeder, the stone is fed to the large inclination conveyor, and then sent to the screening building, where the limestone is screened After being divided, the qualified particle size is weighed and sent to the silo on the top of the preheater by a large inclination conveyor. The powder under the sieve is sent to the storage yard by a conveyor and is regularly transported out by a forklift.

         

    2. Limestone calcination

    Limestone calcination is composed of a vertical preheater + a rotary kiln + a vertical cooler, with an output of 100-800t/d. The material is introduced into the preheater body from the silo on the top of the preheater through the discharge chute, and at the same time by the rotary kiln The incoming high-temperature flue gas preheats the material to above 1000°C to partially decompose the limestone, and then pushes it into the tail of the rotary kiln by hydraulic push rods, and after high-temperature calcination in the rotary kiln, it is discharged into the cooler and blown in by a fan The material is cooled to ambient temperature +60℃and discharged from the cooler. The air blown in by the cooler enters the rotary kiln as secondary air to participate in combustion.

         

    3. Finished product delivery

    After being discharged from the cooler, the finished lime is transported to each finished lime storage by chain conveyor, bucket elevator and belt conveyor. The discharge valve under the lime storage silo is used to load the lime in the silo into cars and tankers for transportation. Set up storage warehouses of different sizes according to customer requirements.

         

    The finished product silo adopts circular silo, 2 5~50mm finished product silo, 1 finished product silo less than 5mm, the volume of each silo is about 800t;

         

    4. Flue gas treatment

    The high-temperature flue gas produced by the combustion of the rotary kiln is exchanged with limestone in the preheater, and the temperature is reduced to below 250 ℃, and then enters the cyclone dust collector for primary dust collection to collect large particles of dust, and then It enters the bag filter and is discharged into the atmosphere by a high-temperature fan after dust removal. The dust concentration of the exhaust gas is less than 30mg/m3. A cold air control system is installed at the inlet of the dust collector to protect the dust collector.

    Related Equipment

    Equipment Configuration: rotary kiln, vertical preheater, bucket elevator

    Contact Us

    Please leave a message. Get answers next business day.

    Name *

    Email *

    Telephone

    Message *

    Send message & get quote